Сви чланци од info@romiks.rs

Laminirano staklo

Laminirano staklo – Romiks

Оставите коментар

 

Laminirano staklo je sigurnosno staklo koje se sastoji od dva ili više slojeva stakla, istih ili različitih debljina, povezanih sigurnosnom folijom za laminiranje.
Laminiranje se vrši sa PVB (polyvinil butyral), EVA (etilen vinyl acetat – transparentna ili opal) i TPU (thermoplastic polyurethane) folijama.

Laminirano staklo sa EVA (etilen-vinyl acetat) folijom.

Laminirano staklo

– uložena sila do pucanja folije………………………… > 23 N/mm2
– transmisija svjetla (za kombinaciju +0,76+4)………………… 87%
– transmisija UV zraka (za kombinaciju 4+0,76+……………… 0,2%
– zvučna izolacija (za kombinaciju 4+0,76+4)………………… 34 dB

Osim debljine 0,76 mm moguće debljine međuslojeva su još 1,52 mm i 2,28 mm. Debljim međuslojem dobijaju se bolje tehničke karakteristike, ali se koriste i kada to zahtjeva tehnologija.

Laminirano staklo sa TPU (thermoplastic polyurethane) folijom

Laminirano staklo sa TPU folijom je najkvalitetnije sigurnosno staklo koje povezuje najbolje tehničke karakteristike EVA i PVB folije, te briljira svojim izrazito velikim koeficijentom čistoće, kao i zvučnom i termičkom izolacijom.
Ovakvo staklo najčešće nalazi primjenu u specijalnim područjima (vetrobranska stakla na putničkim avionima i bočna stakla na automobilima).
TPU folija je pogodna i za povezivanje drugih materijala sa staklom, najčešće polikarbonatno staklo, što omogućuje izradu balističkih stakla do BR-6 kategorije, a odlikuje se izuzetno malom težinom po m2.

Za lam. staklo sa TPU folijom predlažemo prethodnu konsultaciju sa našim tehničkim osobljem, budući da se radi o specijalnom proizvodu.

 

Kaljeno laminirano ravno staklo se sastoji od dva ili više stakala, koja posebnom termičkom obradom dobijaju 5 puta veću čvrstoću, te su povezana sigurnosnom folijom u jednu cjelinu. Takva obrada omogućuje montažu na tačkaste „Spider“ nosače, za koje su unapred predviđene rupe u staklu. Koristi se za ograde, nadstrešnice, pregradne stene, klizna i zaokretna vrata i dr.

Takvo staklo se može izraditi u varijanti sa transparentnom ili opal folijom.
Maksimalne dimenzije za transparentno staklo iznose 2500 x 4800 mm, dok za laminirano staklo sa opal folijom maksimalne dimenzije iznose 2200 x 4800 mm.
Postoji mogućnost izrade emajliranog parapeta (najčešće za staklene ograde), koji ima funkciju skrivanja podkonstrukcije ili betona koji se nalazi iza stakla. Moguća je i izrada digitalnog printa koji se nalazi unutar kaljenog laminiranog sklopa, te se time sprječava eventualno oštećenje printa, a olakšava se čišćenje stakla.

http://romiks.rs/

Laminirano staklo 

Некатегоризовано

Laminated glass-Romiks

Оставите коментар

Laminated glass laminated glass is safety glass consisting of two or more layers of glass, of the same or of different thickness, related security foil for lamination. Laminating is done with CARPENTER (polyvinil butyral), EVA (ethylene vinyl acetate – transparent or opal) and TPU (thermoplastic polyurethane) foils. Laminated glass with EVA (ethylene vinyl acetate) film Maximum dimensions glass laminated with EVA film that can make the 2200 x 4800 mm. Međuslojeva thickness can be 0.80 mm; 1.20 mm; 1.60 mm; … Main technical characteristics of EVA foil:-strength of grip glass-glass…………………………… " 14 N/cm2-strength the foil … … … … … … … … … … … … … …. 190 N/cm2-transmission light………………………………………………… "< 87% EVA folija odlikuje se visokim faktorom umrežavanja što međusloj čini otpornim na vlagu i temperaturu nakon laminiranja, pa je pogodna za izradu stakala koje se koristi u eksterijeru, gdje je rub lamistala izložen vremenskim uticajima (montaža na spider nosače i sl.) EVA folija je, zbog svoje niske viskoznosti tokom laminiranja, izrazito pogodna za laminiranje kaljenih stakala i stakala koja imaju neravnu površinu. 87%="" eva="" folija="" odlikuje="" se="" visokim="" faktorom="" umrežavanja="" što="" međusloj="" čini="" otpornim="" na="" vlagu="" i="" temperaturu="" nakon="" laminiranja,="" pa="" je="" pogodna="" za="" izradu="" stakala="" koje="" se="" koristi="" u="" eksterijeru,="" gdje="" je="" rub="" lamistala="" izložen="" vremenskim="" uticajima="" (montaža="" na="" spider="" nosače="" i="" sl.)="" eva="" folija="" je,="" zbog="" svoje="" niske="" viskoznosti="" tokom="" laminiranja,="" izrazito="" pogodna="" za="" laminiranje="" kaljenih="" stakala="" i="" stakala="" koja="" imaju="" neravnu=""></ 87% EVA folija odlikuje se visokim faktorom umrežavanja što međusloj čini otpornim na vlagu i temperaturu nakon laminiranja, pa je pogodna za izradu stakala koje se koristi u eksterijeru, gdje je rub lamistala izložen vremenskim uticajima (montaža na spider nosače i sl.) EVA folija je, zbog svoje niske viskoznosti tokom laminiranja, izrazito pogodna za laminiranje kaljenih stakala i stakala koja imaju neravnu površinu.> Also, by lamination with EVA film there is the possibility of combining other materials between the panes (PVC, PET, POLYKARBONAT, ACRYLIC, etc.) Negative EVA property sheet is too high adhesion foils and glass which is not suitable for production of protiprovalnih glass. Lack of EVA foil is its higher price which makes lamistal glass more expensive in comparison to lamistal worked with CARPENTER. Laminated glass with CARPENTER (polyvinyl butyral) foil laminated glass with CARPENTER film has the same application as well as those made with EVA collar, but CARPENTER has better safety performance. Namely, CARPENTER has a high coefficient of elasticity and sound insulation, and much higher optical purity relative to EVA foil. An exception is the application of glass in exterior. If the laminated glass with CARPENTER foil used for exterior, it is necessary to protect the edges of the glass from all weather conditions because otherwise there is a possibility of additional voids "glass. Maximum dimension of laminated glass with CARPENTER foil that can make is 2500 x 4500 mm. These are the technical characteristics of laminated glass with CARPENTER (d = 0, 76 mm):-flexibility of foil to bursting … … … … … … … … … … … … … … … … > 280%-invested power the film…………………………………… > 23 N/mm2-transmission of light (for a combination of 4 + 0.76 + 4)………………… " ………… " 87%-transmission of UV rays (for a combination of 4 + 0.76 + 4)……………………… " 0.2%-sound insulation (for a combination of 4 + 0.76 + 4)…………………………… " 34 dB Except thickness of 0.76 mm thickness are possible međuslojeva 1.52 mm and 2.28 mil. Thicker Interfacial Layer gets the better technical characteristics, but are used and when it requires technology. Laminated glass with TPU (thermoplastic polyurethane) film laminated glass with TPU foil is the highest quality safety glass that connects the best technical characteristics of EVA and CARPENTER films, and it kicks your extremely large rate of purity, as well as sound and thermal insulation. This glass is most often used in special areas (the storm glass on passenger planes and side glass on cars). TPU foil is suitable for connection of other materials with glass, typically polycarbonate glass, which allows the creation of ballistic glass to BR-6 categories, and also has an exceptionally low weight per m2. For laminated glass with TPU foil suggest prior consultation with our technical staff, since it is about a special product. Tempered laminated flat glass is composed of two or more glass, that special thermal processing of receive 5 times the strength, and the associated security foil in a single unit. Such a process allows mounting on dotted "Spider" mounts, which are forecasted in advance, holes in the glass. It is used for railings, canopies, dividing stones, sliding and hinged doors, etc. Such glass can be make in version with transparent or opal. The maximum dimensions for transparent glass amounts 2500 x 4800 mm, while for laminated glass with opal foil maximum dimensions 2200 x 4800 mm amounts. There is a possibility of making enamelled parapet (usually for glass railings), who is hiding the substructure or concrete which is located behind the glass. And production of digital printing, which is located inside the hardened laminated board, thus preventing damage printing, and facilitates the cleaning of the glass.  

Kaljeno staklo, Keramičko staklo, Laminirano staklo, Vatrostalno staklo

Uredi članak

Оставите коментар

SZR”ROMIKS” je kompanija čije poslovanje obuhvata funkcionalno  organizovane i uskladjene delatnosti, uz jedinstveni operativni i finansijski menedžment i zajedničku, komplementarnu infrastrukturu:

  • Nabavka i logistika (uvoz, skladištenje i distribucija stakla)
  • Manipulacija sa staklom (uvoz, skladištenje, obrada i distribucija)

  Sedište firme je u Paraćinu, u okviru posebnog, funkcionalno projektovanog poslovnog kompleksa od 300 m2, situiranog u jugo-istočnoj zoni grada, u kojem se nalaze i specijalna skladišta za stakla, vozni park, garaže i sva neophodna oprema i tehnička infrastruktura.

  Od svog osnivanja, firma beleži stalan razvoj, dosledno zastupajući i sprovodeći politiku isključivo selektivnog rada i prvorazrednog poslovanja. Danas je SZR”ROMIKS” uvoznik flot-stakla, proizvođač kaljenog i vatrostalnog stakla ujedno i distributer za teritoriju Republike Srbije, Bosne i Hercegovine, Crne Gore i Makedonije. SZR”ROMIKS” redovno snabdeva kaljenim i vatrostalnim staklima kao i staklenim diskovima proizvođače i prodavce bele-tehnike, proizvođače kotlova, grejnih tela, procesne tehnike,velikoprodajne centre i dr.

  Posebna pažnja poklanja se stalnom i sistematskom usavršavanju i doškolovavanju postojećih kadrova, što je nametnuto i specifičnošću i posebnom osetljivošću delatnosti sa i u vezi sa staklom, a visok tehničko-tehnološki nivo organizacije funkcionisanja i rada firme (elektronika, tehnička pomagala, permanentno obrazovanje kadrova i dr) obezbeđuje optimalne poslovne efekte.

  SZR”ROMIKS”, u skladu sa Politikom kvaliteta i politikom zaštite životne sredine, uključio se u Projekat „Očistimo Srbiju“. Definisanim aspektima životne sredine SZR”ROMIKS” upravlja u svim svojim poslovnim procesima i pripada grupi društveno odgovornih kompanija.

 

Некатегоризовано

Edit article

Оставите коментар

SZR "ROMIKS" is a company whose business includes functional and organized industry sizes worked out, with unique operational and financial management and a shared, complementary infrastructure:

  • Acquisition and logistics (import, storage and distribution of glass)
  • Manipulation with glass (import, storage, processing and distribution)

  Head Office is in Competition, in the special, functional projected business complex of 300 m 2, situiranog in the South-Eastern area of the city, in which there are special containers for glass, car park, garage and all the necessary equipment and technical infrastructure.   Since its inception, the company records a steady development, consistently representing and implementing a policy of selective work only and great business. Today's BUSINESS "ROMIKS" flot importer-glass, tempered glass, and refractory manufacturer and distributor for the territory of the Republic of Serbia, Bosnia and Herzegovina, Montenegro and Macedonia. SZR "ROMIKS" regularly supplies over tempered and vatrostalnim glass and glass disks manufacturers and salespeople white-techniques, manufacturers of boilers, heaters, process engineering, whole-sale centers, etc.   Special attention is paid to the constant and systematic training and doškolovavanju of existing staff, which is imposed and specificity and sensitivity to special activities and in relation to glass, and high technical and technological level of the Organization and functioning of labour companies (electronics, technical AIDS, permanent education, etc) provides optimal business effects.   SZR "ROMIKS", in accordance with the policy of quality and environmental protection policy, included in the project "clean up Serbia". The defined aspects of environment SZR "ROMIKS" controls in all its business processes and belongs to a group of socially responsible companies.